Taillights and Mounts
Iron Cross Style Vertical bracket
This bracket is very strong, and will hold up the way you expect it to. The license tag area is the same size as a standard license plate and WILL NOT accept a trim ring. I believe the bracket should be as un-obtrusive as possible, and your Chopper has no room for any extra unnecessary trim anyway. The bracket mounts to the outside of any 3/4″ axle.
The light uses a standard 1157 light bulb, available almost anywhere.
Hidden Axle Sidemount bracket
I am now offering sidemount license plate and taillight brackets for CFL® frames, and other frames that have hidden axles.
These brackets will bolt onto tabs that get welded to the frame rails. If the bracket gets hit by the lawnmower in the garage, it can be replaced without altering the frame.
Shown with my Doubleshot light, but available to fit almost any taillight.
Oh yeah, 100 percent MADE IN THE U.S.A.!
Double Shot Style Bracket
Price: from $195.00
Double Shot High Intensity LED Taillights
This new taillight Is all business. It is CNC machined out of solid aluminum, and has (2) 1″ diameter dual intensity LED lights to get you noticed. It is VERY bright, and the LED’s are super reliable, and stingy on current draw. The housing is highly polished, and is held together with polished stainless steel socket head screws, and brass wingnuts. Nylock nuts or acorn nuts are optional.
The sidemount bracket is my bullet-proof lightweight steel design, well proven and built to last forever.
Also available is custom “fender mount” version
Oh yeah, 100 percent MADE IN THE U.S.A.!
Double Shot BDL Taillight
This solid mount will attach a Double Shot taillight to your electric start BDL primary, and the radiused tag will hug the rear pulley just right. The kit comes ready to install after you apply the finish of your choice on the laser cut and machine formed mount. The light is the same “ultra bright” LED Double Shot light that my other kits use.
Radiused Double Shot Sidemounts
Here’s a new way to sidemount a Double Shot taillight. The tag mount is radiused to properly match the radius of a chain sprocket or belt pulley, and mounts to the axle bolt. Sturdy like you would expect, and BRIGHT too.
Brass Knuckle Tailight
Price: from $425.00
I did a limited production run of these pains-in-the-neck to produce Brass Knuckle Taillights. They are expensive and time consuming to make, but they are high quality and very bright. Machined and polished from 6061 aluminum, and lit with 100.00 worth of LED lights.
I sell the light by itself for 425.00 plus shipping, and I sell it with just about any style of mounting bracket for 475.00 plus shipping. Sidemounted on the axle, weld-on sidemount, fender mount, or ? Just choose the “custom mounting” option and then specify how you want in the form to the right.
Singleshot Sidemount Taillight
This new sidemount taillight and license plate bracket mounts to the upper rear left fork leg on your Hardtail frame with (2) fishmouthed bungs (supplied in kit).
It was used on my “X-15” Chop-off bike, as well as the LeRoy Thompson winning Discovery Build-Off bike and Brew Bikes winning “Flat out Flatty”.
It functions as a taillight and brakelight, and is brighter than a stock light.
’32 Ford Sidemount
Price: from $80.00
This indestructible sidemount will accept any of the aftermarket vintage Ford taillights. It is available in a vertical or horizontal tag mount, and will outlast the drivetrain of whatever sickle you install it on – guaranteed.
Quick Change Sidemounts
Price: from $295.00
Can’t decide between a vertical or horizontal sidemount? Worried that future laws in your state might make vertical plates illegal? If so, then this new sidemount is for you.
Simply loosen 2 fasteners with a wrench, rotate the tag to the desired position, and re-tighten. Perfect too for traveling into states that might have different tag laws that your home state. Axle mounted, and made to last.
This taillight was developed for a customer who wanted a retro style bullet light, without the overwhelming size of a Caddy light. It is by far the brightest LED light available, and the bullet lens makes the light more visible from the side too. Like all of my lights, this is 100 percent machined and built in the USA. Even the LED is American. Available in a horizontal or vertical axlemount, or a horizontal or vertical weld-on mount.
Bullet Sidemount is also available in a weld-on style. Call for details