If it ain't Real it ain't Steel!

Oil Tanks and Accessories

Oil Tanks and Accessories

Round Oil Tank Mounts for Moon Oil Tanks – Standard

Price: $65.00

The stock Moon brackets are prone to failure and these can be custom made to your specs. The standard is a “one piece” bracket (one piece each side).

Check out our deluxe Moon oil tank mount here

Quantity
Loading Updating cart…

Round Oil Tank Mounts for Moon Oil Tanks – Deluxe

Price: $135.00

The stock Moon brackets are prone to failure and these can be custom made to your specs. The deluxe is made of 2 pieces each side, bolted together.

This allows you to weld the bracket to the frame and still unbolt the end cap so the tank can be removed more easily.


Check out the standard mount here

Quantity
Loading Updating cart…

Remote Oil Filter Adapter Bracket

Price: $50.00

This mount will allow you to run a remote oil filter on your 4 speed rigid framed bike, without welding anything to the frame. It mounts to the tranny kicker cover, and uses a commercially available remote filter bracket.

$50.00 for the adapter, and you furnish the remote filter assembly and filter.
I can get you one at additional cost if needed

Quantity
Loading Updating cart…

Custom Stainless Steel Oil Tanks

Price: from $445.00

If you have a need for a Custom Oil Tank, with a battery box, oil filter, or a special need for plumbing, etc. contact me for pricing. Raw tanks with battery boxes start at 445.00 fully welded and ready to run. If you want mirror finish polishing an additional 125.00. I mean MIRROR FINISH!

I use my standard 5 3/4″ diameter tanks and custom tailor the length to suit, and the ends are domed, not flat. It adds a little cost, but the look is well worth it.

Product Options
Quantity
Loading Updating cart…

Stainless Steel Oil Tank Kit

Price: from $160.00

If you can weld, this kit will save you big bucks over buying a pre-made tank, and you will also end up with a tank of superior quality.

This kit will give you everything you need to make an awesome oil tank for your Chopper…….
Included in the kit:

  1. 14 gauge. type 304 stainless steel tube (with all holes for mounting bungs and couplings pre-punched) 5 1/2″ inside diameter by 11 1/2″ long
  2. “Domed” end caps (made to slip into the ends), (3) 1/8″ NPT stainless steel half-couplings
  3. Mounting bungs with 5/16″-18 tapped holes (not shown)
  4. 1-3/8″ diameter tube to use as a fill tube (also not shown).
Product Options
Quantity
Loading Updating cart…
LoadingUpdating…