These stainless steel plates mount to the axleplates on a Paughco frame, and keep the paint from scraping off when you adjust the axle.
The kit includes stainless steel mounting screws, and 39.00 plus 7.00 S&H will get it shipped to your mailbox.
Plates to join your motor to trans, CNC burned out of 1/4″ steel plate.
Available in plain (no cut-outs), or with Maltese cross cut-out, spider web pattern, F.T.F., or just about anything you can dream up!
Even available to join generator motors to late model 4 speeds.
These axle adjusters are standard 3/8″-24 thread, and 100 percent stainless steel. They come polished with jam nuts. They offer 3 1/2″ of adjustment, and retail for 30.00 plus 7.00 S&H.
These plates are a great start to building your own mid controls, and will work with an open belted Shovel/Evo and a 4 speed trans. Each side is prick-punched for a peg location so that your pegs will be in line on both side of the bike, and you can adjust the location up or down as desired. Laser cut in steel, of course!
These axle holders will allow you to run your 3/4″ axle in a set of early forged HD axleplates, or in a Paughco frame without using a special axle. Any frame with a 7/8″ axle slot will accept these locators, and give you the option of using a standard 3/4″ axle.
This is a new kit, designed to mount on fenders with very little clearance between the inside of the fender and tire. Simply drill a 3/8″ hole in the fender, and insert one of the threaded top-hat style inserts from the inside of the fender. Lightly tack it in place, and the outer bung will then mount to the outside of the fender with the button head screw that is supplied. 3/8″ diameter round stock can then be welded to the outer bung, or flat struts can also be welded to the bung (neither is included)
(1) package includes (4) bungs, (4) top hat threaded insters, and (4) stainless steel button head screws.
$40.00 plus shipping