|
|
|
Muskrat Seat kit
This seat kit is designed for the
builder who wants a custom made seat. The pan is laser cut from 10
ga. steel, formed, and receives a built-in nose hinge assembly that
utilizes my bearinged pivot tube. The hinge plates are stainless
steel, so the pan can be powdercoated and the hinge polished. The
spring mounts are welded onto the pan, and are threaded to allow the
springs to be affixed. Pan size is 13" long by 10 1/2" wide.
This is the same pan assembly that is
used on my Muskrat bike. I built that bike to travel long
distances, and this seat is built to handle a lot of miles in
comfort. Pics of seat on bike can be seen at:
http://www.fabkevin.com/projects/muskrat/index.htm
The kit includes a raw seat pan/hinge
assembly, a set of weld-on spring bungs, and a set of 3" seat
springs.
$295.00 plus 15.00 S&H
|
||||||||||||
|
||||||||||||
